Super Industrial Lining Pvt. Limited has advantage of Glass and PTFE under one roof .Group is associated with Process Engineering system since decades and supplied many such systems.
We offer following engineering systems.
• Bromine Production from Sea Bittern.
• Bromine Recovery from Industrial Bromide Solution.
· Toluene Halogenations Products like Benzyl Chloride.
· Hydrochloric Acid-Absorption-
· Hydrochloric Acid Concentration.
· Hydrochloric Acid Purification.
· Hydrochloric Acid -Gas Generation-(Sulfuric Acid /Boiling/Calcium chloride.
· Sulphuric Acid- Dilution systems from Concentrated Sulphuric Acid –Battery Grade.
· Sulfuric Acid Concentration from Weak to 70% Sulphuric Acid.
• Gas Absorption-HCl-Br2-Cl2-SO2-HBr and NOX.
|Minimum Order Quantity||1 Set|
|Design Type||Standard, Customised|
Sulfuric Acid Dilution System from Super Industrial Lining P. Limited are available as continuous systems, dilute 93% or 98% sulfuric acid to any lower strength.
Dilute sulfuric acid of different Strength used in Lead Acid Batteries, Chemical reactions
The systems available as Manual or automatic and pumps (if required) for the safe, accurate dilution of the concentrated acid.
Systems are available for all flow rates and diluted acid strength.
The sulfuric acid dilution system can be manually started by the operator or can be automatically activated by the optional control system.
For very strong sulfuric acid dilution (i.e. 30%, 50%, or 70%), the system mixes the strong acid and water in the sulfuric acid static mixer using high turbulence created with a specialized system design. Although the amount of heat generated is large, the unique design avoids high exit temperatures. The combination of properly sized equipment and the heat exchanger allow heat removal with completed acid dilution temperatures easily below 45°C using cooling tower water.
· Manual as well as optional Automatic Dilution
· PLC Based Control System if required
· Lined Magnetic Drive Pumps, if required
· Lined Static Mixer
· Level Control & Alarms
· Adjustable Flow Rates
· Heat Exchanger and Cooling Tower (if required)
· Lined Pipe and Fittings/Borosilicate glass
· Storage Tanks Can Be Provided
· Strong Acid and Water Supply Pumps can be provided
Please provide following details to give you offer:
|Minimum Order Quantity||1 Set|
|Capacity||20 kg/hr tp 1800 kg/hr|
HCl gas Absorption from 20 Kg/hr to 900 kg/hr
Hydrogen Chloride gas is produced from the variety of process industries mainly from chlorination operation. This must be scrubbed before venting to the atmosphere. Hydrogen chloride has great affinity of water and easily absorbed in water. The absorption of Hydrogen Chloride gas in to water cause large amount of heat, due to exothermicity which has to be removed by means of suitable device.
The remaining un-absorbed gas along with other inserts from the bottom of the absorber is entering in to Secondary Process water is circulated through Secondary Scrubber to absorb the HCl gas and form dilute acid. The advantage of providing Tail Scrubber is to get scrubbed Unscubbed 5% gases.. This dilute acid is circulated through Falling Film Absorber to absorb HCl gas as explained above.
High absorption efficiency.
High acid concentration achievable.
Safe Operation due to low isothermal temperature.
Handle a wide range of gas loading with minimum liquid flow rates to maintain full tube wetting.
Variation in Hydrogen Chloride Gas flow rates or Composition causes no operation problem.